A DC controller offers a cost effective solution to variable speed motor control. Standard drive includes armature and line fusing, overload protection, power on indicator, speed pot and an on/off switch. It also contains internal adjustments for soft start/stop and maximum/minimum speeds. Enclosure is a Nema 1.
DC Variable Speed Drives
- Controller has selectable input line voltage of 115 or 230V AC single phase. The output voltage will be 90 or 180V DC depending on input voltage
- Standard drive is capable of a 10:1 speed ratio up to 2 HP
- A Forward/Brake/Reverse toggle switch can be installed in the standard drive for reversing applications
- Standard enclosure is rated Nema 1. Can be upgraded to Nema 4X/12
- Optional drive can be combined with a remote mounted push button station, foot pedal or hand pendant
- A photo eye can be wired to an optional drive for stopping the conveyor as well as an auto-stop/restart function
- Can be shipped loose, mounted only, or mounted to the conveyor and wired to the motor
- Power cord and plug available for 115V-1ph-60hz up to 3/4 HP, power cord less plug only for other voltages
- Standard DC controllers is not to be used with any other control devices
